TASCAM HS-2 117If the operation of this unit becomes irregular, pleasecheck the following things before requesting repair.If the following measures do not resolve the problem,contact the store where you purchased the device or aTEAC Repair Center.8 Power does not turn on.Confirm that the power plug, for example, is connectedcompletely.8 Media is not recognized.• Confirm that the card is securely inserted into the cardslot.• Pause recording or playback.8 The unit controls do not function.Is the panel lock function ON?8 Playback is not possible.Confirm that the audio file's sampling frequency(44.1/48/88.2/96/176.4/192kHz) and quantization bit rate(16/24) are compatible.Confirm that the project and the sound file's samplingfrequency are consistent.8 There is no sound.• Reconfirm the connections of your monitoring systemand check the level of your amplifier.• When using a TASCAM RC-HS20PD remote controller(sold separately), confirm that the fader is not lowered.• If you cannot hear the input signal, turn inputmonitoring ON.• If you cannot hear the playback sound, turn inputmonitoring OFF.8 Recording is not possible.• Reconfirm connections.• Adjust the recording levels.• If the media storage device does not have sufficientspace, erase unneeded DATA to increase the amount ofavailable space or change the media storage device.• If the maximum number of recordable takes or themaximum take number has been reached, change therecording session.• If the total number of items in the folder, including filesand subfolders/directories, is too large, change therecording session.8 Setting changes are not remembered.This unit backs up settings whenever the media storagedevice selection is changed, a project, session or take isloaded, and playback or recording occurs. After startup, ifnone of these actions is conducted, settings might not bebacked up even if they are changed.8 I hear noise.Confirm that none of the cables have problems.8 The touch panel does not work properly.• Do not use commercially-available protective film forLCD screens on the touch panel.• Confirm that the panel lock function is not engagedand locking the display.8 I cannot create a new project.• Confirm that a project with the same name does notalready exist.• If the amount of space remaining on the media storagedevice is insufficient, a new project cannot be created.15–Troubleshooting
