44 TASCAM HS-2This unit has the following three operation modes.• Timeline mode provides a working environment(session) based on linear time similar to a tape recorder.In timeline mode, up to 2 tracks can be recorded andplayed back. Marks can also be edited.• Take mode uses takes (files) as recording and playbackunits. Up to 2 tracks can be recorded and played back,and marks can also be edited.• Playlist mode provides a playlist playback function.Up to 2 tracks can be played during playlist playback.Timeline mode functionsThe following functions can be used in timeline mode.• Up to two channels of simultaneous recording andplayback is possible at all compatible samplingfrequencies (Fs).• Mirror recording function utilizing dual slot.• R e c o r d i n g a n d p l a y b a c k w i t h t i m e c o d esynchronization is possible. (The optional SY-2 board isrequired.)• A single file can be created from a designated timeinterval in a timeline using the bounce function.• Marks can be set, managed, edited and used forplayback.• Compatibility with the AES31 file standard allowsimport and exchange of data with other devices.NOTEBecause the AES31 file standard does not contain supportfor 176.4kHz or 192kHz projects, edit information forthose sample rates will be saved and created in an originalformat based on AES31.In timeline mode, playback units are called “regions,” andtheir extent is shown in the track area of the Home Screen.Take mode functionsThe following functions can be used in take mode.• Up to two channels of simultaneous recording andplayback are possible for all compatible samplingfrequencies (Fs).• Auto cue, auto ready and incremental play functionsare available.• Using a TASCAM RC-HS20PD or other remote controller,flash start playback is possible (five pages of 20 keyseach).• Marks can be set, managed, edited and used forplaybackPlaylist mode functionsThe following functions can be used in playlist mode.• Playlists can be edited and managed.• Auto cue, auto ready and incremental play functionsare available.• Compatibility with JPPA flash start standards enablethe exchange of playlists with other devices.• Up to two channels playback are possible for allcompatible sampling frequencies (Fs).• Using a TASCAM RC-HS20PD or other remote controller,flash start playback is possible (five pages of 20 keyseach).Selecting the operation mode1 Press the MENU key on the front panel to open theMENU screen.2 Touch the OPERATION MODE button to open theOPERATION MODE screen.3 Touch the button for the mode that you want touse to select it.The button for the selected mode appears yellow.TIMELINE MODETAKE MODEPLAYLIST MODE4 Touch the SET button to enable the selected modeand return to the Home Screen.6–Overview of operation modes