50 TASCAM HS-23 When you touch the SAVE button on the pull-downmenu, the information will be saved on the select-ed card.During saving, the progress status will be shown inthe pop-up window. When saving is complete, thepop-up window will disappear.Attaching a name to and saving AES31editing informationYou can attach a name and save the current timeline asan AES31 file. The file saved will be created in the currentsession folder.1 Press the HOME key on the front panel to open theHome Screen.2 Touch the AES31 file name display button on theHome screen to open a pull-down menu.3 Touch the SAVE AS button on the pull-up menu toopen the AES31 NAME screen where you can inputthe AES31 DATA file name.Input the file name. Follow the procedures in“Editing the project name” on page 38.4 Touch the Enter button on the AES31 NAME screenor press the DATA dial to save the data with inputname.During saving, a progress bar will be shown in thepop-up window.When saving is complete, the pop-up window willdisappear.NOTEIf a file with the same name already exists, a pop-upwindow opens to confirm whether you want to overwritethat file or not. Touch the OK button to overwrite that file,or touch the CANCEL button to return to the AES31 NAMEscreen.Creating new AES31 editing informationYou can create a new AES31 file in the current session(session that is currently loaded).1 Press the HOME key on the front panel to displaythe Home Screen.2 Touch the AES31 file name display button on theHome Screen to display the pull-down menu.3 Touch the CREATE AES31 button on the pull-downmenu item to display the AES31 NAME screen forinputting the AES31 editing file name.Input the file name. See “Editing the project name”on page 38 for the input method.7–Timeline mode