TASCAM HS-2 833 Touch the ENTER button to confirm the setting.TIP• You can also use the PLAY key and other transport keyswhile listening to the audio to find the location, andthen touch the CURRENT b button to input that valuehere.• This can also be edited using an externally connectedkeyboard on the EDIT START POINT screen / EDITEND POINT screen.Press the keyboard’s ESC key to clear all the values.Editing the playback starting time1 Press the HOME key on the front panel to open theHome screen.2 Touch a file name or title name button display andthen touch the ADJUST ENTRY button in the pull-down menu to open the ADJUST ENTRYXXX screen.(“XXX” is the entry number.)NOTEYou can also open this screen by touching the MENUbutton and then touching the ADJUST button in thepull-up menu when a take is selected on the ENTRY listscreen or one of the key assign buttons on the left isselected on the ASSIGN file screen.3 Touch the Start TC Fade/Level tab to displaythe screen below.4 Touch the EDIT button to open, and touch thenumber buttons on the EDIT START TC screen tochange the Start TC.5 The value shown next to the Start TC item is theplayback starting time for the selected entry. Touchthe EDIT button for the START TC item to open theEDIT START T/C screen where you can change theplayback starting time.Use the FRAME EDIT button on the EDIT STARTT/C screen to set whether or not you will edit theframe value.6 Use the number buttons to input the playback starttime on Entry.• If you begin input without selecting a digit, inputwill start from the smallest one.• To input a specific digit, touch it to make itsbackground yellow, and then use the numberbuttons or the DATA dial to enter two digits at atime.• Touch the CURRENT b button to copy the currenttime code time to the input value.• Touch the CLEAR button to erase all entered values.7 Touch the ENTER button to confirm the setting.TIP• You can also use the PLAY key and other transport keyswhile listening to the audio to find the location, andthen touch the CURRENT b button to input that valuehere.• This can also be edited using an externally connectedkeyboard.Press the keyboard’s ESC key to clear all the values.9–Playlist mode
