118 TASCAM HS-2The following is a list of messages that the HS-2 shows in pop-up windows. Refer to this list to learn more about eachmessage as well as how to respond to them.The content of the first messages varies depending on the situation. The subsequent messages are listed in alphabeticalorder.Message Details and responses RemarksMM (vvvvvvvv)NUM OF PROJECTS : pUSED SIZE : uFREE SIZE : fTOTAL SIZE : tThis shows information about the media.MM = SD or CFvvvvvvvv = volume levelp : project numberu : capacity usedf : unused capacityt : total capacity of mediaMM DEVICE ERROR The media cannot be recognized. MM = SD, CF, or USB memoryMM Format failed An error occurred during formatting, and formatting could notbe completed. MM = SD, CF, or USB memoryMM has no projects.Please create a project. The media does not have any project. MM = SD or CFMM is not available There is no media. MM = SD, CF, or USB memoryMM is not usable You cannot copy. MM = SD, CF, or USB memoryMM MEDIUM ERROR The unit failed to read the media. MM = SD, CF, or USB memoryMM not recommended formatfor Recording/Playing.Format this card?Since the media was not formatted in this unit, proper re-cording and playback operations cannot be guaranteed, so itshould be formatted.MM = SD or CFThis appears when the card is formattedwith a cluster size that is smaller than thestandard of this unit.MM Read Error An error occurred when reading the card. MM = SD, CF, or USB memoryMM to MM' Copy failed. Copying all of media to media' was not possible. MM = SD, CF, or USB memoryMM' = SD, CF, or USB memoryMM unrecognized formatPlease Format this card.This media has been formatted in a format other than FAT. For-mat it for use with this unit. MM = SD, CF, or USB memoryMM unsupported type This media does not meet the specifications required by thesystem, so it cannot be used. MM = SD, CF, or USB memoryMM Write Error An error occurred when writing to the card. MM = SD, CF, or USB memory"nnn" : "eeeeeee""tttttttt"fs/bit/FileMode/NumOfTracksEntry LENGTH : *h**m**s**fSTART T/C : hh: mm: ss.ffThis shows entry information"nnn" : entry number"eeeeeeee" : entry name"tttttttt" : take namefs : sampling frequencybit : bit rateFileMode : MONO or POLYNumOfTracks : number of tracksEntry LENGTH : length of entrySTART T/C : entry start time code time"nnn":"NNNNNNNN"cannot be found A take with the displayed No. and name cannot be found. nnn : Take No.NNNNNNNN : Take name"pppppppp"SESSION : nFs : fTIMECODE : tThis shows project information."pppppppp" = project namen : number of sessionsf : sampling frequencyt : time code frame type"ssssssss"TAKES : nFs : fTOTAL SIZE : uTOTAL TIME : tThis shows session information."ssssssss" = session namen : number of takef : sampling frequencyu : space usedt : total time of all takes16–Messages