84 TASCAM HS-2Editing the length and level of fade-in/fade-out1 Touch the HOME key on the front panel to displaythe HOME screen.2. Touch the ADJUST ENTRY button on the pull-downmenu that is displayed by touching the file namedisplay button or the title name display button.The ADJUST XXX screen is shown. (“XXX” is the en-try number.)3 Touch the Start TC Fade / Level tab to displaythe screen below.4 Set by rotating the DATA dial after selecting theknobs of Fade In, Fade Out and Level.Setting value:• Fade In / Out Length: 0 – 30 seconds( 0.1 second per step or 1.0 second per step when thedial is pressed and rotated)• Level range: -∞ to +10dBNOTE• When the length of the fade -in / fade out ischanged, the value is automatically edited to matchthe maximum possible within the playback start /end time constraints.• The playback level is shown by the red, solid line.• The basic level (0dB) is shown by the orange, dottedline.Rehearsal playback operation / actionYou can perform a rehearsal playback using the transportcontrols while on the ADJUST ENTRY screen.• The operation is the same as during normaltransport operation expect that the . / / keysare used to jump to the Entry's File Start / Start Point/ End Point and File End positions.• Change the Start Point / Fade In Length to movethe playback point to the Start Point. If you changeit during the playback, playback will be performedafter the playback point is moved.• Change the End Point / Fade Out Length to movethe playback point to the point below. If you changeit during the playback, playback will be performedafter the playback point is moved.When PREVIEW OFF When PREVIEW ONWhen changingEndPointTwo seconds beforeEndPointTwo seconds beforeFadeOut startsWhen changingFade Out LengthTwo seconds be -foreFadeOut startpointTwo seconds be -foreFadeOut startpoint• Touch the PREVIEW button to change the contentsof the rehearsal playback.Rehearsal playback when PREVIEW OFF is set• The original audio is played back without the FadeIN / OUT or Level adjust parameters being applied.• You can move out of the range of Start / End Point.• When the End Point is reached during rehearsalplayback, the playback jumps back to the Start Pointand stops.Press the PLAY key to start playback from the StartPoint.Transfer to the following End Point is made using the,. key, / key, SHIFT+/ key, and by JOG/SHUTTLE dial operations.Rehearsal playback when PREVIEW ON is set• Only the range between the Start / End Point isplayed back.Locating to a point outside of that range is notpossible.• The audio is played back with the Fade IN / OUT andLevel adjustment parameters applied.9–Playlist mode
