TASCAM HS-2 597–Timeline modePasting the copy buffer data into the desig-nated position (Paste)You can paste copied data into the designated position.NOTE• When the designated position is located betweenfade-in and fade-out, the fade-in and fade-outinformation will be deleted.&RS\ EXIIHU1 Press the HOME key to display the Home Screen.2 Touch the EDIT MODE button to enter the editmode.3 Move the timeline cursor to the position where youwant to paste copy buffer.4 Touch the EDIT button to display the pull-up menu.Touch the Paste button on the pull-up menu.NOTEThe Paste button is highlighted white and available onlywhen the copy buffer contains data.5 When pasting is complete, the Home Screen will bedisplayed after the pop-up window is displayed.In this case, the EDIT pull-up menu will remain open.Pasting the data in the designated file intothe designated position (Paste File)You can paste an entire 2ch BWF file/WAV file into thedesignated position.NOTE• When the designated position is located betweenfade-in and fade-out, the fade-in and fade-outinformation will be deleted.EZI ILOH1 Press the HOME key to display the Home Screen.2 Touch the EDIT MODE button to enter the editmode.3 Move the timeline cursor to the position where youwant to paste a file.4 Touch the EDIT button to display the pull-up menu.Touch the Paste File button on the pull-up menuto open the BROWSE screen.5 Touch the e button to select the media containinga file to paste on the BROWSE screen.NOTEIf the top page of the BROWSE screen is not displayed,touch on the screen. The media selection screenappears.
