86 TASCAM HS-2PlaybackProject/session/playlist selection1 Press the PROJECT key on the front panel to openthe PROJECT screen.2 Touch the e button next to the project that con-tains the playlist that you want to play to open thesession selection screen.If it is not the current project, a pop-up windowappears confirming that you want to load it. Touchthe OK button.3 Touch the e button for the session that containsthe playlist that you want to play to open the playl-ist selection screen.If it is not the current session, a pop-up windowappears confirming that you want to load it. Touchthe OK button.TIPYou can also touch the current project/session namebutton at the top right of the PROJECT screen to open theplaylist selection screen for the current session.4 Touch the name of the playlist that you want toplay to select it. Its background becomes yellow.5 Touch the MENU button on the Playlist selectionscreen to open a pull-up menu.Playlist selection screen pull-up6 Touch the LOAD button in the pull-up menu to loadthe playlist.A confirmation pop-up window appears.Touch the OK button or press the DATA dial.When loading completes, the Home Screen opens.NOTEOn the playlist selection screen, instead of touching theMENU button followed by the LOAD button in the pull-upmenu item, you can also touch the e button for theplaylist that you want to play to load it.The same pop-up message as above appears. Touch theOK button or press the DATA dial.9–Playlist mode