UniPOS IFS7002 Instruction Manual

Also see for IFS7002: Instruction manual Service instructions for the staff Service instructions

Contents

UniPOS IFS7002 Instruction Manual Manual pdf 25 page image

UniPOS Interactive Fire ControlPanel IFS7002Instruction Manual Page 25Revision 2.05 Of 10712.2.1. Menu FaultsUse the menu to display detailed information for faults in the fire control panel and in addressabledevices.Menu Faults contains the following subordinate menus:− Меню Total – displays information for all fault conditions;− Menu Zones – displays information only for zones in fault condition;− Menu Devices – displays information only for devices in fault condition;− Menu Outputs – displays information only for outputs in fault condition (monitored outputs andaddressable output devices).The four subordinate menushave identical layout. If no faults aredetected (or no faults of a specifictype are detected) the followingscreen appears:If faults are detected, the followingscreen appears:Each message can be displayedin a few lines – from 1 to 4. It bringsout the following information− Text for the type of the fault –this information is mandatory;− Information for the device(zone – if the device is firedetector, loop and address) –in case the fault condition isin an addressable device;− Text message for the zone –visualized if the faultcondition is in an addressablefire detector;− Text message for the device– visualized if the fault condition is in an addressable device.Buttons and situated in the right panel section scroll the pages up and down – next pageor previous page (if any are available). One page contains two messages for fault condition.Mode:DAY 11:44:29 Thu 03 Feb 2005FIRE CONTROL PANEL IFS7002UniPOSFaults Total: 00003Disables Total: 000Failed Outputs: 00000Disabled Outputs: 000List/Faults/Total 00030001 Fault in Zone 003Zone: Zone 0030002 Removed DeviceZone003 Loop001 Addr003Zone: Zone 003Addr: Point 1.003Mode:DAY 11:45:23 Thu 03 Feb 2005FIRE CONTROL PANEL IFS7002UniPOSList/Faults/TotalNO FAULTS