UniPOS IFS7002 Instruction Manual

Also see for IFS7002: Instruction manual Service instructions for the staff Service instructions

Contents

UniPOS IFS7002 Instruction Manual Manual pdf 84 page image

UniPOS Interactive Fire ControlPanel IFS7002Instruction Manual Page 84Revision 2.05 Of 10713.8.3. Menu Addressable outputsUse the menu to check the addressable outputs of the control panel.When you enter the menu the following operations are being run:− If no addressable outputs are available – a screen with the message No addressable outputsappears; the only option is to exit the menu;− If some addressable outputsare available – a commandfor activation is sent to thefirst addressable output, if theloop is On and is initialized. Ascreen for the output statusand for selection of the nextoutput for check up isvisualized:For the current addressableoutput is displayed:− The loop it is included in, itsaddress in the loop and thenumber of the output in thedevice, if more than oneoutput is available;− Device text message;− Device status (On or Off) – itis displayed only when the loop the device is included in is On and is initialized;− Information for the communication with the device:♦ the loop is off – appears the message The loop is off (no attempt for communicationwith the device has been made);♦ the loop is On, but is not initialized – appears the message Uninitialized loop (noattempt for communication with the device has been made);♦ the loop is On and is initialized – as a result from communication with the device(Successful data transfer to the device or Error in data transfer to the device).The current addressable output is pointed by arrow – „>>”.When the data transfer is successful the device output will be activated.Buttons and in the right panel section are visualized if more than one addressable outputis available; the Go to field in the heading and the digit buttons appear if addressable outputs in morethan one device are available.When you press a digit button the Go to field is activated; you can enter a random 3-digit numberfor the device. To edit the number use button press it to delete the last entered digit.The devices obtain numbers according to the following sequence: from the first device in Loop 1to the last device in Loop 1; from the first device in Loop 2 to the last device in Loop 2.When you press button and a number is already entered in the Go to field, the firstaddressable output in the first device whose number is equal to or higher than the number in the fieldwill be selected:− if the number is 0, the first addressable output will be selected;− if the number is higher than the number of device having the last addressable output, the lastaddressable output will be selected.At the same time:− the number in the Go to field is deleted, i.e. the field is deactivated;− the output that has been checked receives a command to switch off, if the loop is On and isinitialized;− the output that has been selected for check-up, receives a command for activation, if the loopis On and is initialized;Mode:DAY 14:43:46 Mon 28 Mar 2005Check addressable Outputs Go to:Activated Device:>>Lp1 Аddr25.1Point 1.025Device is OnSuccessful data Transfer to the Device0 1 2 3 4 5 6 7 8 9 СС