UniPOS IFS7002 Instruction Manual

Also see for IFS7002: Instruction manual Service instructions for the staff Service instructions

Contents

UniPOS IFS7002 Instruction Manual Manual pdf 90 page image

UniPOS Interactive Fire ControlPanel IFS7002Instruction Manual Page 90Revision 2.05 Of 107Upon unsuccessful operationappears the following screen:Upon successful operation the menu will be exited automatically.14. Remote Control Mode14.1. DescriptionThe control panel enters Remote Control Mode when an external control device of higher level(computer from a centralized Dispatcher Control Point or similar) performs set up of the control panelconfiguration parameters via serial interface. All other modes and condition are exited. When inRemote Control Mode the panel does not provide service to fire alarm zones, addressable devices,monitored outputs and other periphery devices (all outputs are off); it is under the control of theexternal device. Upon exit of Remote Mode reset of the control panel is performed.14.2. Indication14.2.1. LED and sound indicationIn Remote Mode only the green LED indicator is illuminated (Power supply). The localsounder is off.14.2.2. Тext messagesThe following screen appears onthe LCD display:14.3. KeypadIn Remote Mode none of the buttons are active.Remote controlMode:DAY 10:38:08 Tue 29 Mar 2005Clear ArchiveOperation unsuccessful!Would You like to run the Operation again?– confirm– cancel