UniPOS IFS7002 Instruction Manual

Also see for IFS7002: Instruction manual Service instructions for the staff Service instructions

Contents

UniPOS IFS7002 Instruction Manual Manual pdf 83 page image

UniPOS Interactive Fire ControlPanel IFS7002Instruction Manual Page 83Revision 2.05 Of 10713.8. Menu ChecksThe menu allows the user to set up the control panel outputs (monitored, relay and addressable),the display and the buttons. It cointains the following submenus and functions:− Menu Monitored outputs;− Menu relay outputs;− Menu Addressable outputs;− Function Display;− Menu Buttons.13.8.1. Menu Monitored outputsUsing the menu you can run a check on control panel minitored outputs.When you entere the menyMonitored output 1 is triggered (if notin Fault condition) and the followingscreen appears:At the activated monitored outputis displayed the message Yes, ininversive colours; at the output notactivated yet is displayed themessage No in general colours.When you press button orthe activated monitored output isswitched off and the other output isactivated (if not in fault condition).Upon exit of the menu the activated monitored output is switched off.13.8.2. Menu Relay outputsUsing the menu you can run a check on the relay outputs of the fire control panel.When you enter the menu, Relayoutput 1 is activated and thefollowing screen appears:At the activated relay outputappears the message Yes ininversive colours; at the realy outputnot activated yet appears themessage No, in general colours.When you press button orthe activated relay outputs isswitched off, and the other one isactivated.Upon exit of the menu the activated relay output is switched off.Mode:DAY 14:32:26 Mon 28 Mar 2005Check relay OutputsActivated DeviceRelay Output 1 YesRelay Output 2 NoMde:DAY 14:02:46 Mon 28 Mar 2005Check monitored OutputsActivated Device:Monitored Output 1 YesMonitored Output 2 No