LJ SERIES 2D EMULATIONSyntax E (s#Hwhere # is a real number valid up to two decimal places.The Pitch command for the secondary font is:E )s#HExample To set the primary font as 12-pitch and the secondary font as 10-pitch, enter:E (s12HHex 1B 28 73 31 32 48Dec 27 40 115 49 50 72The Pitch command for the secondary font is as follows:Syntax E)s10HHex 1B 29 31 30 48Dec 27 41 49 48 72HeightPurpose The Height command selects the character height of the font inpoints (72nds of an inch). There are separate commands toselect height for the primary and secondary fonts. If the selectedheight is unavailable, the closest match is used. Fonts within aquarter of a point of the requested height are seen by the printeras identical selections.Syntax E (s#Vwhere # is the selected height in points up to two decimalplaces.The Height command for the secondary font is:E )s#VXEROX 4213 LASER PRINTER PROGRAMMER REFERENCE 3-39
