ADMINISTERING THE FAX SOFTWARE4. Do one of the following:• If you use automatic loading, reboot the computer toload the fax software with the new settings.or• If you do not use automatic loading, reboot to unloadthe software and type \PSFAX\PSFAX from the MS-DOSprompt to load your new settings.Setting advanced options with INSTALL/AThe advanced install program (INSTALL/A) is used to changesome of the internal settings for the fax printer, as well as someof the advanced settings for the fax software.INSTALL/A can do the following:• Print fax printer settings• Edit fax printer settings• Edit timeout settings• Edit printer port redirection• Edit fax printer password.Running the INSTALL/A programAt the MS-DOS c: command prompt, type \PSFAX\INSTALL/A (oruse the appropriate path for your fax software installation).The Advanced Installation Options screen appears:Printing and editing internal settingsThe printer has a number of internal settings that are stored in itsnon-volatile RAM memory (NVRAM). You can use INSTALL/A todo the following:• Produce a Fax Settings Page showing your current settings• Change the current settings.Follow these steps to print a settings page:1. Make sure your printer is on and on-line.XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE 3-3
