F reeF low Process Man ager Ope rator and Ad ministrator Guide2-68Workflow BuilderSetting up or modifying an image watermarkImage watermarks can be transparent or opaque, scaled, rotated,variably positioned from the document edge and can appear eitherunderneath or on top of the page content. Colorization is notsupported.To set up or modify an image watermark1. Double-click the Watermarks step in a workflow.2. Select one of the following:• Select [New], and then select [Image Watermark] to setup a new image watermark.• Select a watermark from the list, and then select [Modify]to change an existing image watermark.3. Enter a file path or select [Browse] to locate a TIFF, JPEG,BMP, or PDF image file.NOTE 1: The selected image must reside on a local drive.NOTE 2: Only page 1 of the PDF is selected.a. In the Browse for watermark image file dialog, select a file.b. Select [Open]. The dialog closes and the path and filename display in the Watermark filename text box.4. Select a percentage from 1 to 200 to scale the image.5. Select or type the horizontal position from the PDF documentbox: From left, Center, or From right.6. Select or type the vertical position from the PDF documentbox: From top, Center, or From bottom7. Select the position relative to Crop Box, Media Box, BleedBox, Trim Box or Art Box.8. Select the desired degree of rotation, from 0-359 degrees. Theicon changes to reflect the selected rotation.9. Select a transparency from 0-100. The greater thetransparency level, the less opaque the watermark.
