Service Manual ixServicing Electrical ComponentsBefore starting any service procedure, switch off the printer power and unplug thepower cord from the wall outlet. If you must service the printer with power applied,be aware of the potential for electrical shock.WarningTurning the power off by using the On/Off switch does not completely de-energize the printer. You must also disconnect the printer power cord from theAC outlet. Position the power cord so that it is easily accessible during servicing.WarningDo not touch any electrical component unless you are instructed to do so by aservice procedure.Servicing Mechanical ComponentsWhen servicing mechanical components within the printer, manually rotate driveassemblies, rollers, and gears.WarningDo not try to manually rotate or manually stop the drive assemblies while anyprinter motor is running.Servicing Fuser ComponentsWarningThis printer uses heat to fuse the toner image to media. The Fuser Assembly isVERY HOT. Turn the printer power off and wait at least 5 minutes for the Fuserto cool before you attempt to service the Fuser Assembly or adjacentcomponents.S7300-02S7300-03manuals4you.commanuals4you.com
