x InstallationCAUTION Do not install the Machine Controller in any of the following locations.• Locations that are subject to direct sunlight• Locations that are subject to ambient temperatures that exceed the operating conditions• Locations that are subject to ambient humidity that exceeds the operating conditions• Locations that are subject to rapid temperature changes and condensation• Locations that are subject to corrosive or inflammable gas• Locations that are subject to excessive dust, dirt, salt, or metallic powder• Locations that are subject to water, oil, or chemicals• Locations that are subject to vibration or shockThere is a risk of fire, electrical shock, or device damage. Never install the Machine Controller in an atmosphere containing halogen (fluorine, chlorine,bromine, or iodine).There is a risk of malfunction or damage. Do not step on the Machine Controller or place heavy objects on the Machine Controller.There is a risk of injury or an accident. Do not block the air exhaust ports on the Machine Controller. Do not allow foreign objects toenter the Machine Controller.There is a risk of internal element deterioration, malfunction, or fire. Always mount the Machine Controller in the specified orientation.There is a risk of malfunction. Leave the specified amount of space between the Machine Controller, and the interior surface ofthe control panel and other devices.There is a risk of fire or malfunction. Do not subject the Machine Controller to strong shock.There is a risk of malfunction. Suitable battery installation must be performed and it must be performed only by an experi-enced technician.There is a risk of electrical shock, injury, or device damage. Do not touch the electrodes when installing the Battery.Static electricity may damage the electrodes.
