4.6 Data Transfer without Using the MPE7204.6.2 Using the MPLoader Ver.44-744.6.2 Using the MPLoader Ver.4The MPLoader Ver.4 software was developed to provide an easy way for users to modify theinternal definition files, application programs, and register data in an MP3000-series MachineController without using the MPE720. The following table lists the various models of this prod-uct.The model depends on the number of PCs that the software can be installed on.Function Loading Application Data• The folder containing all of the data for one Machine Controller in the MPE720 can be loadedinto the Machine Controller in a batch operation.• You can make setting when creating the data that is loaded into the Machine Controller toalso back up the application that is already loaded into the Machine Controller. Saving to Flash MemoryThe MPL700 Client can save data to flash memory.System RequirementsThe following table gives the system requirements.Applicable Models and Communications InterfacesThe following models and communications interfaces can be used with the MPL700 Client:• Model: MP3000-series Machine Controller• Communications: Serial (RS-232C) or Ethernet (except relay and duplex)Name Model DescriptionMPL700 ClientCPMC-MPL700C Single licenseCPMC-MPL700C-10 10 licensesCPMC-MPL700C-20 20 licensesItem SpecificationCPU Pentium II, 400 MHz min.RAM 128 MB min.HD Space is required for software installation.MPL700C software installation: 30 MBDisplay resolution 800 × 600 min.OS Windows 2000, Windows XP, Windows Vista, Windows 7
