4.6 Data Transfer without Using the MPE7204.6.2 Using the MPLoader Ver.44-754 Creating User ProgramsMPL700 FeaturesThe MPL700 provides an easy way to load updated applications to the end-user systems with-out using the MPE720. Therefore, unlike the MPE720, it does not have functions for systemconfiguration definitions, programming, monitoring, and other operations.The application provider sends the compressed application file to the user. The end user canspecify the received compressed file in the MPL700 to load the application into the MachineController. Overall WorkflowThe following figure shows the dataflow until the updated application is loaded into the end-user system (CPU Module) using the MPL700 Client. : Create the compressed file for sending with the compressed sending function of theMPE720 (version 5.10 or higher).This is the same function as the one supported by the MPL700 Server. : Load the compressed file that was provided into the MP3000-series Machine Controllerwith the MPL700 Client.indicates transfer via a network, removable disk, or other methods that are not automaticallysupported by this software.Refer to the following manual for details on the features and operation of the MPLoader.MP2000/MP2000-series MPLoader Ver.4 User’s Manual (Manual No.: SIEP C880761 01)MPL700ClientApplication Provider End UserControllerMPE720(version 5.10 orhigher)Create compressed file to send.Send it as an email attachment.Extract the application environment.Load into the Controller.
