A.2 MP3300 Installation and Usage ConditionsA.2.1 Environmental ConditionsA-5AppA Controller SpecificationsA.2 MP3300 Installation and Usage ConditionsInstall the MP3300 Controller in an environment with the following conditions.A.2.1 Environmental ConditionsControl Panel Cooling MethodThe components that are used in the MP3300 require the ambient operating temperature to bebetween 0 and 60°C. Use one of the methods described below to ensure adequate cooling inthe control panel. Control Panels with Natural Cooling• Do not mount the MP3300 at the top of the control panel, where the hot air that is generatedinside the panel collects.• Leave sufficient space above and below the MP3300, and maintain adequate distances fromother devices, cable ducts, and other objects to ensure suitable air circulation.• Do not mount the Machine Controller in any direction other than the specified direction.• Do not mount the Machine Controller on top of any device that generates a significantamount of heat.• Do not subject the Machine Controller to direct sunlight.Item SpecificationAmbient Operating Temperature 0 to 60°C (Forced cooling is required if 55°C is exceeded.)Ambient Storage Temperature −25 to 85°CAmbient Operating Humidity 10% to 95% RH (with no condensation)Ambient Storage Humidity 10% to 95% RH (with no condensation)Pollution Degree Conforms to JIS B 3502 Pollution Degree 2.Corrosive Gas There must be no combustible or corrosive gases.Operating Altitude 2,000 m max.If the ambient temperature exceeds 55°C, use forced-air cooling.Note
