Yamaha F200B Service Manual

Also see for F200B: Rigging guide Owner's manual Owner's manual

7-327Removing the Rectifier Regulator1. Remove the Rectifier Regulator protector1.2. Disconnect the cooling water hoses aand b.3. Disconnect the Rectifier Regulatorground lead c.4. Remove the plastic ties 2, and thenremove the Rectifier Regulator leads.5. Remove the Rectifier Regulator couplersd from the junction box.6. Remove the Rectifier Regulator 3.7. Remove the cover 4 and gasket 5 fromthe Rectifier Regulator.8. Remove the anode 6 from the cover.Checking the Rectifier Regulatoranode1. Check the anode. Replace if eroded.Clean if there is grease, oil, or scales.NOTICE: Do not apply grease, oil, orpaint to the anode.Removing the junction box1. Remove the caps 1, and then discon-nect the PTT relay terminals a.2. Disconnect the PTT relay coupler b.3. Remove the PTT relay 2.4. Disconnect the junction box wiring har-ness extension terminal c and groundlead terminal d.5. Remove the plastic ties 3.6. Remove the holder e on the wiring har-ness from the junction box 4.7. Remove the junction box 4.d3 21bca2564baa121Junction box