Yamaha F200B Service Manual

Also see for F200B: Rigging guide Owner's manual Owner's manual

BRKT Bracket unit9-25TIP:Make sure to fit the protrusions a on thegasket 4 into the corresponding slots in theoil strainer 5.3. Install the dowels 7, a new gasket 8,and the oil pan 9, and then tighten theoil pan bolts 0 and A temporarily.4. Install a new gasket B, the exhaust man-ifold C, and a new rubber seal D, andthen tighten the exhaust manifold boltsE temporarily.5. Tighten the exhaust manifold bolts Efirst, and then tighten the oil pan bolts 0and A to the specified torque.6. Install the rubber seal F and water pipeG.7. Install the dowels H, a new gasket I,the plate J, and a new gasket K, andthen install the muffler L.Oil strainer bolt 6:12 N·m (1.2 kgf·m, 8.9 ft·lb)456612345aa8 9 0A070Exhaust manifold bolt E:20 N·m (2.0 kgf·m, 14.8 ft·lb)Oil pan bolt 0 and A:20 N·m (2.0 kgf·m, 14.8 ft·lb)CEE DB