Yamaha MTN1000P Owner's Manual

Also see for MT 10: Owner's manual Owner's manual Owner's manual

Special features4-1012345678910111213TIP Pushing the cruise control/YVSLpower switch “ ” while the cruisecontrol system is active and thecruise control setting indicator light“ ” is on will also switch to theYVSL standby mode. The cruise control system and theYVSL control system cannot bothbe active at the same time. If the color of the speed setting in-dicator icon has changed andflashes, have a Yamaha dealercheck the vehicle.Adjusting the speed limitWhile the YVSL is activated, push the“RES+” side of the cruise control/YVSLsetting switch to increase the set speedlimit or the “SET–” side to decrease theset speed limit.TIPPushing the setting switch once willchange the set speed in increments ofapproximately 1.0 km/h (1.0 mi/h).Holding the setting switch will changethe set speed in increments of 10 km/h(10 mi/h).Deactivating the YVSLWhen the YVSL is disengaged, engineoutput is gradually derestricted to en-sure a smooth transition to full ridercontrol of the throttle.Perform one of the following operationsto deactivate the YVSL: Turn the throttle grip past theclosed position in the decelerationdirection. The YVSL “ ” indica-tor icon will go off and the systemwill return to standby mode. Push the cruise control/YVSLpower switch “ ” located on theleft handlebar. The YVSL displaywill go off and return to the fuel me-ter (gear display in track mode).Using the resume functionPush the “RES+” side of the cruise con-trol/YVSL setting switch to reactivatethe YVSL when in standby mode. Thespeed limit will return to the previouslyset speed limit. The YVSL “ ” indi-cator icon will come on.WARNINGEWA21210It is dangerous to use the resumefunction when the previously set1. Speed setting indicator iconkm/h1 2N12:00BM 13 SCSkm/hLIMOFF OFF11. Deceleration direction1