Yamaha MTN1000P Owner's Manual

Also see for MT 10: Owner's manual Owner's manual Owner's manual

Instrument and control functions5-3612345678910111213ed in the tool kit to make the ad-justment.3. Tighten the locknut to the specifiedtorque. NOTICE: Always tightenthe locknut against the adjust-ing ring, and then tighten thelocknut to the specifiedtorque.[ECA22760]Rebound damping forceTurn the adjusting screw in direction (a)to increase the rebound damping force.Turn the adjusting screw in direction (b)to decrease the rebound dampingforce.To set the rebound damping force, turnthe adjuster in direction (a) until it stops,and then count the clicks in direction(b).TIP When turning the damping forceadjuster in direction (a), the 0 clickposition and the 1 click positionmay be the same. When turning the damping forceadjuster in direction (b), it may clickbeyond the stated specifications,however such adjustments are in-effective and may damage the1. Spring preload adjusting ring2. Locknut3. Special wrench1. Distance A(a(a)(a)(b(b)(b)11 22 331Spring preload:Minimum (soft):Distance A = 76.5 mm (3.01 in)Standard:Distance A = 80.5 mm (3.17 in)Maximum (hard):Distance A = 84.5 mm (3.33 in)Tightening torque:Locknut:28 N·m (2.8 kgf·m, 21 lb·ft)1. Rebound damping force adjusting screwRebound damping setting:Minimum (soft):23 click(s) in direction (b)Standard:11 click(s) in direction (b)Maximum (hard):1 click(s) in direction (b)(a(a)(a) (b(b)(b)11