E-107SOUND FIELDPROGRAMS EnglishDIGITAL SOUND FIELD PARAMETER DESCRIPTIONS LIVENESSFunction This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflectionsdecay.Control range 0 – 10Description The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than in onewhich has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to as “dead,” while a roomwith highly reflective surfaces is referred to as “live”. The LIVENESS parameter lets you adjust the early reflection decayrate, and thus the “liveness” of the room. P. INIT. DLY (Presence Initial Delay)Function This parameter adjusts the delay between the direct sound and the first reflection in the presence sound field.Control range 1 – 99 msDescription The larger the value, the later the first reflection begins. S. INIT. DLY (Surround Initial Delay)Function This parameter adjusts the delay between the direct sound and the first reflection on the surround side of the sound field.You can only adjust this parameter when at least two front channels and two rear channels are used.Control range 1 – 49 msDescription The larger the value, the later the first reflection begins. You can only adjust this parameter for the Dolby Digital and DTSsignals.LevelTimeDeadSource soundLevelTimeLevelTimeLiveSound sourceSmall reflectedsoundLargereflected soundSmall value = 0 Large value = 10
