Yamaha pmn Owner's Manual

Also see for CinemaDSP digital RX-Z1: Owner's manual Service manual

Contents

E-47BASIC OPERATIONS EnglishBASIC PLAYBACK Notes on playing DTS-CD/LDs• If the digital output data of the player has been processed in anyway, you may not be able to perform DTS decoding even if youmake a digital connection between this unit and the player.• If you play a source encoded with a DTS signal and set the inputmode to “ANALOG”, this unit may reproduce the noise of anunprocessed DTS signal. In this case, connect the source to adigital input jack and set the input mode to “AUTO” or “DTS”.• If you switch the input mode to “ANALOG” while playing asource encoded with a DTS signal, this unit reproduces no sound.• If you play a source encoded with a DTS signal with the inputmode set to “AUTO”, this unit automatically switches to the DTS-decoding mode (The “t” indicator lights up.) after havingdetected the DTS signal. When playback of the DTS source iscompleted, the “t” indicator may flash. While this indicator isflashing, only DTS source can be played. If you want to play anormal PCM source soon, set the input mode back to “AUTO”.• If you play a source encoded with a DTS signal with the inputmode set to “AUTO”, the “t” indicator may flash when asearch or skip operation is performed while the DTS source isplaying back with the input mode set to “AUTO”. If this statuscontinues for longer than 30 seconds, this unit will automaticallyswitch from “DTS-decoding” mode to PCM digital signal inputmode. The “t” indicator will turn off. Notes on playing an LD source• For LD software that does not contain a digital soundtrack,connect the LD player to the analog jacks and set the input modeto “AUTO” or “ANALOG”.• If the LD player is transmitting a signal by a non-standard method,this unit cannot detect the Dolby Digital or DTS signal. In thiscase, the decoder automatically switches to PCM or analog.• Some A/V components such as LD players output different audiosignals through their analog and digital jacks. Change the inputmode as necessary.• While you are operating the LD player and playing a disc encodedwith a Dolby Digital signal, if you switch from the pause orchapter forwarding function to normal playback, you may hear thePCM or analog sound an instant before the Dolby Digital signal isplayed. In this case, set the input mode to “D.D.RF”.