Yamaha pmn Owner's Manual

Also see for CinemaDSP digital RX-Z1: Owner's manual Service manual

Contents

E-61ADVANCEDOPERATION EnglishSET MENU ITEMS3 HP TONE CTRL (headphone tone control)Use this feature to adjust the level of the bass and treble when you use your headphones.Control range (dB): –6 – +3 for both BASS and TRBL (treble)Initial setting: 0 dB for both BASS and TRBL (treble)11 Select “BASS” or “TRBL”.22 Tap or to change each level.4 CENTER GEQ (center graphic equalizer)Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right mainspeakers.Control range (dB): –6 – +6Initial setting: 0 dB for 5-band11 Tap to select a higher frequency and tap to select a lowerfrequency.You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.22 Tap or to adjust the level of that frequency.Note• You can monitor the center speaker sound while adjusting this item by using the testtone. Tap on the PARAMETER control panel before starting the foregoingprocedure. “TEST DOLBY SUR.” (or “TEST DSP”) appears on the video monitor, andthe test tone starts alternating among the speakers. Once you begin this procedure, thetest tone remains at the center speaker and you can hear how the sound changes as youadjust the various frequency levels. To stop the test tone, tap (see pages __ and__).5 REAR CT GEQ (rear center graphic equalizer)Use this feature to adjust the built-in 5-band graphic equalizer so the rear center speaker tone matches that of the left and right rear speakers.Control range (dB): –6 – +6Initial setting: 0 dB for 5-band11 Tap to select a higher frequency and Tap to select a lowerfrequency.You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.22 Tap or to adjust the level of that frequency.Note• You can monitor the center speaker sound while adjusting this item by using the testtone. Tap on the PARAMETER control panel before starting the foregoingprocedure. “TEST DOLBY SUR.” (or “TEST DSP”) appears on the video monitor, andthe test tone starts alternating among the speakers. Once you begin this procedure, thetest tone remains at the rear center speaker and you can hear how the sound changes asyou adjust the various frequency levels. To stop the test tone, tap (see pages __and __).3 HP TONE CTRL≥ BASS |TRBL |- +0dB4 CENTER GEQ≥ 100Hz |300Hz |1kHz |3kHz |10kHz |- +0dB5 REAR CT GEQ≥ 100Hz |300Hz |1kHz |3kHz |10kHz |- +0dB