E-71ADVANCEDOPERATION English Switching to another component withoutaffecting the active componentIf you switch to another component (for which you already defineda component action), RC codes are sent out the moment you selectthe component.To switch to another component without sending RC codes, followthis procedure.ExampleYou defined a device action for the VCR1: when you select theVCR1, the D-TV switches to channel 10. Now you wish to keepwatching channel 2 on the D-TV when you switch to the VCR1 torewind a tape.11 Open the Device menu.22 Press and hold the left or right button (labeled “NOIR”).The remote control icon turns around , indicating that thecomponent you are going to select will not send IR codes so asnot to affect the active component.REMOTE CONTROL FEATURES33 Tap the component you want to select.The control panel of the new selected component appears andthe remote control icon returns to its original position. You cannow operate the new selected component without affecting thepreviously active component.The remote controlicon turns around.The control panel of the new selected components appears.
