E-4811 Tap on the RECEIVER control panel to openthe DSP control panel.The DSP control panel is displayed as shown below.22 Select the desired program.Press PROGRAM q/w.Tap one of the DSP program buttons (such as or).BASIC PLAYBACKSelecting a sound field programYou can enhance your listening experience by selecting a DSP program. There are 12 programs with sub-programs available with this unit.However the selection depends on the input signal format and not all the sub-programs are possible for all input signal formats. For detailsabout each program, see pages __ to __.Note• The whole DSP control panel consists of three control panels(pages 3/8 to 5/8). You can scroll through these control panelsusing and . The controls also can beused to select one of three DSP control panels.After selecting the desired program, tap the same buttonrepeatedly to select the desired sub-program if available.• Example: Each time or is tapped the sub-programs (“Spectacle” and “Sci-Fi”) switch.Cautions• If a Dolby Digital or DTS signal is input when the input modeis set to “AUTO”, the DSP program automatically switches tothe appropriate decoding program.• Choose a DSP program based on your listening preference,and not on the name of the program. The acoustics of yourlistening room affect the DSP program. Minimize the soundreflections in your room to maximize the effect created by theprogram.• When you select an input source, this unit automaticallyselects the last DSP program used with that source.• When you set this unit in the standby mode, the currentsource and DSP program are memorized and are automati-cally selected when you turn on the power again.• When a source connected to the 6CH INPUT jacks of thisunit is selected, the digital sound field processor cannot beused.• While the over 96 kHz sampling digital signals are beinginput, sound effects cannot be added and only normal stereoplayback is possible.• Sound effects will be added to 96 kHz sampling digitalsignals after converted to 48 kHz.STANDBY/ONINPUT MODEINPUT SELECTORVOLUMESPEAKERSBASSSILENTPHONESA B STEREOPROCESSORDIRECT BASSEXTENSIONFM/AM A/B/C/D/EEFFECTONS VIDEO VIDEOOFFL RPHONOCDTUNERCD–RMD/TAPEDVDSOURCE/REMOTED–TV/LDCABLESATVCR 1VCR 2VCR 3/DVRVIDEO AUXPROGRAM6CHINPUTPRESET/TUNINGEDITMEMORYMAN'L/AUTO FMTUNINGMODEAUTO/MAN'L MONOTREBLEVIDEO AUXL AUDIO OPTICALRPRESET/TUNINGBALANCEREC OUT/ZONE 22D–TV/LD DVDCABLE MD/TAPESAT CD–RVCR 1 TUNERVCR 2 CDVCR3/DVR PHONOV–AUXDSPMOVIE THEATER 1DTS SpectacleVOLUMELFEL C RRLSPARC RRPROGRAM
