Yamaha pmn Owner's Manual

Also see for CinemaDSP digital RX-Z1: Owner's manual Service manual

Contents

E-56BASIC RECORDINGREC OUT/ZONE 2 allows you to record one source while viewing and/or listening to another source.11 Turn on the power to this unit and all connectedcomponents.22 Select the source component you want to recordfrom by using REC OUT/ZONE 2.To record the current input source that you are watching orlistening to, set REC OUT/ZONE 2 to SOURCE/REMOTE.To record the other source than the one that you are watchingor listening to, set REC OUT/ZONE 2 to the source you wantto record.33 Start playback (or select a broadcast station) on thesource component.44 Start recording on the recording component.Notes• Do a test recording before you start an actual recording.• It is not possible to record the sound effect created by this unit’sDSP processing.• When this unit is set in the standby mode, you cannot recordbetween other components connected to this unit.• Operating BASS and TREBLE, BASS EXTENSION, BAL-ANCE, VOLUME, and DSP programs do not affect the recordedsignal.• Setting REC OUT/ZONE 2 to SOURCE/REMOTE and usingthe BGV function (see page __) allows the recording of audio andvideo from a different source.• Use INPUT SELECTOR to switch the source from the one youare watching or listening to while making recording with RECOUT/ZONE2 set to the source component you are recordingfrom.STANDBY/ONINPUT MODEINPUT SELECTORVOLUMESPEAKERSBASSSILENTPHONESA B STEREOPROCESSORDIRECT BASSEXTENSIONFM/AM A/B/C/D/EEFFECTONS VIDEO VIDEOOFFL RPHONOCDTUNERCD–RMD/TAPEDVDSOURCE/REMOTED–TV/LDCABLESATVCR 1VCR 2VCR 3/DVRVIDEO AUXPROGRAM6CHINPUTPRESET/TUNINGEDITMEMORYMAN'L/AUTO FMTUNINGMODEAUTO/MAN'L MONOTREBLEVIDEO AUXL AUDIO OPTICALRPRESET/TUNINGBALANCEREC OUT/ZONE 21 2PHONOCDTUNERCD–RMD/TAPEDVDSOURCE/REMOTED–TV/LDCABLESATVCR 1VCR 2VCR 3/DVRVIDEO AUXREC OUT/ZONE 2Cautions• A given input source is not output on the same REC OUTchannel. (For example, the signal input from VCR 1 IN is notoutput on VCR 1 OUT.)• S-video and composite video signals pass independently throughthis unit’s video circuits. Therefore, when recording or dubbingvideo signals, if your video source component is connected toprovide only an S-video (or only a composite video) signal, youcan record only an S-video (or only a composite video) signal byyour VCR.• DIGITAL OUTPUT jacks and analog OUT (REC) jacks areindependent. Only digital signals are output from DIGITALOUTPUT jacks and analog signals from OUT (REC) jacks.• A source connected to the 6CH INPUT jacks of this unit cannotbe recorded.• The LD q RF (AC-3) input signal cannot be output using RECOUT/ZONE 2.• Check the copyright laws in your country to record from records,CDs, radio, etc. Recording of copyrighted material may infringecopyright laws. Special considerations when recording DTSsoftwareThe DTS signal is a digital bitstream. Attempting to digitally recordthe DTS bitstream will result in noise being recorded. Therefore, ifyou want to use this unit to record sources that have DTS signalsrecorded on them, the following considerations and adjustmentsneed to be made. For LDs, DVDs and CDs encoded with DTS,when your player is compatible with the DTS format, follow itsoperation instruction to make a setting so that the analog signal willbe output from the player.