11 VLAN CONFIGURATIONVLAN ConfigurationBasic VLANConfigurationCreate a Range of VLANs You can use the following command to create a range of VLANs, reducing yourworkload of creating VLANs.c CAUTION: As the default VLAN, VLAN 1 needs not to be created and cannot beremoved.Configuring VLANBroadcast StormSuppressionYou can use the following command to set the maximum volume of allowedbroadcast traffic through a VLAN. When the actual broadcast traffic exceeds thespecified value, the system will discard the extra packets so that the bandwidthoccupied by broadcast traffic can be kept within a specific ratio. In this way, thesystem can suppress broadcast storm, avoid network congestion and ensurenormal network operation.Table 46 Basic VLAN configurationOperation Command DescriptionEnter system view system-view -Create a VLAN and enterVLAN viewvlan vlan-id RequiredThe vlan-id argument rangesfrom 1 to 4,094.Assign a name for the currentVLANname string OptionalBy default, the name of aVLAN is its VLAN ID.Specify the description stringof the current VLANdescription string OptionalBy default, the descriptionstring of a VLAN is its VLANID.Table 47 Create a range of VLANsOperation Command RemarksEnter system view system-view -Create a ranges of VLANs vlan vlan-id1 to vlan-id2 RequiredCreate all VLANs vlan all OptionalTable 48 Configure VLAN broadcast storm suppressionOperation Command DescriptionEnter system view system-view -
