7.3.5 SettingsTable 64:LEXPDIS Group settings (basic)Name Values (Range) Unit Step Default DescriptionOperation OffOn- - Off Operation Off / OnOperationZ1 OffOn- - On Operation Off/On zone Z1XoffsetZ1 -1000.00 - 1000.00 % 0.01 -10.00 Offset of Z1 circle top point along X axis in% of ZbaseZ1diameter 0.01 - 3000.00 % 0.01 100.00 Diameter of imedance circle for Z1 in % ofZbasetZ1 0.00 - 6000.00 s 0.01 0.01 Trip time delay for Z1OperationZ2 OffOn- - On Operation Off/On zone Z2XoffsetZ2 -1000.00 - 1000.00 % 0.01 -10.00 Offset of Z2 circle top point along X axis in% of ZbaseZ2diameter 0.01 - 3000.00 % 0.01 200.00 Diameter of imedance circle for Z2 in % ofZbasetZ2 0.00 - 6000.00 s 0.01 1.00 Trip time delay for Z2Table 65:LEXPDIS Group settings (advanced)Name Values (Range) Unit Step Default DescriptionDirSuperv OffOn- - Off Operation Off/On for additional directionalcriterionXoffsetDirLine -1000.00 - 3000.00 % 0.01 0.00 Offset of directional line along X axis in %of ZbaseDirAngle -180.0 - 180.0 Deg 0.1 -13.0 Angle between directional line and R-axisin degreesTable 66:LEXPDIS Non group settings (basic)Name Values (Range) Unit Step Default DescriptionGlobalBaseSel 1 - 6 - 1 1 Selection of one of the Global Base ValuegroupsTable 67:LEXPDIS Non group settings (advanced)Name Values (Range) Unit Step Default DescriptionInvertCTCurr NoYes- - No Invert current direction1MRK 502 048-UEN A Section 7Impedance protection155Technical manual
