SignalsTable 317:AND Input signalsName Type Default DescriptionINPUT1 BOOLEAN 1 Input signal 1INPUT2 BOOLEAN 1 Input signal 2INPUT3 BOOLEAN 1 Input signal 3INPUT4 BOOLEAN 1 Input signal 4Table 318:AND Output signalsName Type DescriptionOUT BOOLEAN Output signalNOUT BOOLEAN Inverted output signalSettingsThe function does not have any parameters available in Local HMI or Protection andControl IED Manager (PCM600).13.3.1.10 Set-reset memory function block SRMEMORYIdentificationFunction description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberSet-reset memory function block SRMEMORY - -FunctionalityThe Set-Reset function SRMEMORY is a flip-flop with memory that can set or resetan output from two inputs respectively. Each SRMEMORY function block has twooutputs, where one is inverted. The memory setting controls if the flip-flop after apower interruption will return the state it had before or if it will be reset. For a Set-Reset flip-flop, SET input has higher priority over RESET input.Table 319:Truth table for the Set-Reset (SRMEMORY) function blockSET RESET OUT NOUT1 0 1 00 1 0 11 1 1 00 0 0 11MRK 502 048-UEN A Section 13Logic449Technical manual
