Table 227:LOCREM Output signalsName Type DescriptionOFF BOOLEAN Control is disabledLOCAL BOOLEAN Local control is activatedREMOTE BOOLEAN Remote control is activatedVALID BOOLEAN Outputs are valid12.2.6.5 SettingsTable 228:LOCREM Non group settings (basic)Name Values (Range) Unit Step Default DescriptionControlMode Internal LR-switchExternal LR-switch- - Internal LR-switch Control mode for internal/external LR-switch12.2.7 Local remote control LOCREMCTRL12.2.7.1 IdentificationFunction description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLocal remote control LOCREMCTRL - -12.2.7.2 FunctionalityThe signals from the local HMI or from an external local/remote switch are applied viathe function blocks LOCREM and LOCREMCTRL to the Bay control QCBAYfunction block. A parameter in function block LOCREM is set to choose if the switchsignals are coming from the local HMI or from an external hardware switch connectedvia binary inputs.1MRK 502 048-UEN A Section 12Control345Technical manual
