14.16.4 SignalsInputs LEVEL and TEMP together with settings LevelAlmLimit,LevelLOLimit, TempAlarmLimit and TempLOLimit are not supportedin this release of 650 series.Table 424:SSIML Input signalsName Type Default DescriptionBLOCK BOOLEAN 0 Block of functionBLK_ALM BOOLEAN 0 Block all the alarmsLEVEL REAL 0.0 Level input from CBTEMP REAL 0.0 Temperature of the insulation medium from CBLVL_ALM BOOLEAN 0 Level alarm signalLEVEL_LO BOOLEAN 0 Level lockout signalSET_L_LO BOOLEAN 0 Set level lockoutSET_T_LO BOOLEAN 0 Set temperature lockoutRESET_LO BOOLEAN 0 Reset level and temperature lockoutTable 425:SSIML Output signalsName Type DescriptionLEVEL REAL Level service valueLVL_ALM BOOLEAN Level below alarm levelLVL_LO BOOLEAN Level below lockout levelTEMP REAL Temperature of the insulation mediumTEMP_ALM BOOLEAN Temperature above alarm levelTEMP_LO BOOLEAN Temperature above lockout level14.16.5 SettingsTable 426:SSIML Group settings (basic)Name Values (Range) Unit Step Default DescriptionOperation OffOn- - Off Operation Off / OnLevelAlmLimit 0.00 - 25.00 - 0.01 5.00 Alarm setting for levelLevelLOLimit 0.00 - 25.00 - 0.01 3.00 Level lockout settingTempAlarmLimit -40.00 - 200.00 - 0.01 30.00 Temperature alarm level setting of themediumTempLOLimit -40.00 - 200.00 - 0.01 30.00 Temperature lockout level of the mediumtLevelAlarm 0.000 - 60.000 s 0.001 0.000 Time delay for level alarmtLevelLockOut 0.000 - 60.000 s 0.001 0.000 Time delay for level lockout indicationTable continues on next pageSection 14 1MRK 502 048-UEN AMonitoring558Technical manual
