Table 218:SXCBR Output signalsName Type DescriptionXPOS GROUP SIGNAL Group connection to CSWIEXE_OP BOOLEAN Executes the command for open directionEXE_CL BOOLEAN Executes the command for close directionOP_BLKD BOOLEAN Indication that the function is blocked for opencommandsCL_BLKD BOOLEAN Indication that the function is blocked for closecommandsUPD_BLKD BOOLEAN Update of position indication is blockedPOSITION INTEGER Apparatus position indicationOPENPOS BOOLEAN Apparatus open positionCLOSEPOS BOOLEAN Apparatus closed positionTR_POS INTEGER Truck position indicationCNT_VAL INTEGER Operation counter valueL_CAUSE INTEGER Latest value of the error indication during command12.2.3.2 SettingsTable 219:SXCBR Non group settings (basic)Name Values (Range) Unit Step Default DescriptiontStartMove 0.000 - 60.000 s 0.001 0.100 Supervision time for the apparatus tomove after a commandtIntermediate 0.000 - 60.000 s 0.001 0.150 Allowed time for intermediate positionAdaptivePulse Not adaptiveAdaptive- - Not adaptive Output resets when a new correct endposition is reachedtOpenPulse 0.000 - 60.000 s 0.001 0.200 Output pulse length for open commandtClosePulse 0.000 - 60.000 s 0.001 0.200 Output pulse length for close commandSuppressMidPos OffOn- - On Mid-position is suppressed during thetime tIntermediate12.2.4 Circuit switch SXSWI12.2.4.1 SignalsTable 220:SXSWI Input signalsName Type Default DescriptionBLOCK BOOLEAN 0 Block of functionLR_SWI BOOLEAN 0 Local/Remote switch indication from switchyardOPEN BOOLEAN 0 Pulsed signal used to immediately open the switchCLOSE BOOLEAN 0 Pulsed signal used to immediately close the switchBL_OPEN BOOLEAN 0 Signal to block the open commandTable continues on next page1MRK 502 048-UEN A Section 12Control341Technical manual
