3-13Installing SCSI DevicesIn this ChapterYou can connect a total of seven SCSI devices to the SCSI Card2930CU. If you are installing more than two internal SCSI devices,you will need an internal SCSI cable with enough connectors for alldevices.The SCSI card, and each SCSI device (whether internal or external),must have a unique SCSI ID. See SCSI IDs on page A-2 and refer toeach device’s documentation for more information.Note: The card’s SCSI ID is preset to 7 and should not bechanged.Installing Internal SCSI DevicesYou must prepare each internal SCSI device for installation. SeePreparing SCSI Devices for Installation on page A-4 for detailedinstructions.If you are connecting only external devices, skip to ConnectingExternal SCSI Devices on page 3-5.Installing Internal SCSI Devices 3-1Connecting External SCSI Devices 3-5
