Adaptec 2930U User Manual

Contents

5-3TroubleshootingTroubleshooting Q & A – GeneralHow can I tell if the SCSI Card 2930CU software driver is loading properly?Follow the instructions for your operating system as provided inChapter 4, Installing Drivers.Why does an X inside a red circle appear by the SCSI Card 2930CU softwaredriver in Device Manager?The SCSI Card 2930CU software driver is disabled and isn’tloading. To enable the driver1 Double-click the SCSI card software driver in Device Manager.2 Click the General tab, and check Original Configuration(current).Note: In most cases, this is the result of an IRQ conflict. Seethe information on page 5-6.How can I check the status of a resource (for example, IRQ, Memory, I/O)?1 Click Start, point to Settings, then click Control Panel.2 Double-click System, then click on the Device Manager tab.3 Click Computer, then click Properties.4 Go to the View Resources tab and click the option button forthe type of resource you want to check.The setting and the hardware using the setting displays. If a specific resource is not listed, the resource is not used bya device. If a resource is listed more than once, the resource is used bymore than one device. If a resource is used by an unknown device, the resource isused but the device using the resource cannot be detected.