4-4Installing DriversInstalling the Driver When Installing Windows 95/98The Ultra SCSI driver is embedded in the Windows 95/98 CD.During a normal Windows 95/98 installation, the SCSI Card2930CU is detected in your system and the embedded driver isautomatically installed.Note: If Windows cannot detect the SCSI Card 2930CUinstalled in your computer, you must install the drivermanually after the Windows installation is complete. Followthe procedures in either Installing the Driver When Windows 95is Already Installed on page 4-4 or Installing the Driver WhenWindows 98 is Already Installed on page 4-7.Installing the Driver When Windows 95 is Already InstalledTo update or install the driver1 Start Windows 95.2 Click Start, point to Settings, then click Control Panel. Double-click System, then click on the Device Manager tab.
