Adaptec 2930U User Manual
                                                                      | |
Contents
|
B-2Configuring the SCSI Card 2930CU with SCSISelectSCSISelect SettingsSCSISelect Options Available Settings Default SettingSCSI Bus Interface OptionsHost Adapter SCSI ID 0-7 7SCSI Parity Checking Enabled,DisabledEnabledHost Adapter SCSI Termination Automatic,Enabled,DisabledAutomaticBoot Device OptionsBoot SCSI ID 0-7 0Boot LUN Number 1 0-7 0SCSI Device Configuration OptionsInitiate Sync Negotiation Yes, No Yes (Enabled)Maximum Burst Rate 20.0, 10.0, 8.0,6.7, 5.020.0Enable Disconnection Yes, No Yes (Enabled)Send Start Unit Command Yes, No No (Disabled)BIOS Multiple LUN Support Yes, No No (Disabled)Advanced Configuration OptionsPlug-and-Play SCAM Support Enabled,DisabledDisabledReset SCSI Bus at Initialization Enabled,DisabledEnabledHost Adapter BIOS Enabled,DisabledEnabledSupport Removable Disks UnderBIOS as Fixed Disks 2Boot Only,All Disks,DisabledBoot OnlyExtended BIOS Translation forDOS Drives > 1 GB 2Enabled,DisabledEnabledDisplay |
Related manuals for Adaptec 1662200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine