4-11Installing DriversVerifying Driver Installation – Windows 95/98/MeTo verify driver installation1 Click Start, point to Settings, then click Control Panel. Double-click System, then click on the Device Manager tab.2 Click the plus sign (+) next to SCSI Controllers. SCSI Card2930CU should be listed as shown.Windows NT 4.0This section explains how to install the driver for Windows NT 4.0.The driver is aic78xx.sys.If you are performing a first-time Windows NT 4.0 installation, seeInstalling the Driver When Installing Windows NT on page 4-12.If Windows NT 4.0 is already installed on your system, seeInstalling the Driver When Windows NT is Already Installed onpage 4-12.For information on removing your SCSI Card 2930CU, seeRemoving the SCSI Card 2930CU on page 4-14.SCSI Card 2930CUdriver installed
