4-14Installing DriversIn this ChapterAfter installing the SCSI Card 2930CU and your SCSI devices,install the driver by following the instructions appropriate for yourcomputer.Windows 2000 and Windows XPIn Windows 2000 and Windows XP, driver installation is fullyautomatic, including the identification of compatible drivers.Verifying Driver Installation – Windows XPTo verify driver installation1 Click Start, point to Settings, then click Control Panel. Double-click Performance and Maintenance, then double-click System.2 Click on the Hardware tab, then click Device Manager.3 Double-click SCSI and RAID Controllers. Check that theSCSI Card 2930CU is listed. (See the screen shot on page 4-2.)Windows 2000 and Windows XP 4-1Windows Me 4-3Windows 95 and Windows 98 4-3Windows NT 4.0 4-11
