Adding Printers in NetWare102 AXIS 5570e User’s Manual5. Browse to the NDPS Printers. Expand either the NDPS Controlled AccessPrinters or the NDPS Public Access Printers folder, select your newlyinstalled NDPS printer and follow the instructions.When you have completed these steps, you are ready to start printing.Notes:Setup using iPrintiPrint is Novell's next generation of printing software that lets users printto and from all destinations.A standard Web page displays available printers to the user.By clicking a printer, the iPrint client is installed (if not installedpreviously), the printer's driver is downloaded, and a printer is created inthe user's Printer folder, enabling the user to send documents to theprinter from any application on the desktop.Before setting up iPrint printers, make sure that you meet all the iPrintSetup requirements. See the Novell iPrint Administration Guide forinstructions on installing, configuring, and customizing iPrint.AXIS Print servers can be installed as iPrint printers, either by using theNovell LPR gateway (LPR on IP) or the AXIS Gateway ConfigurationSnap-in for iPrint.Axis provides two Snap-ins for iPrint:• AXIS LPR Gateway Configuration• AXIS IPP Gateway Configuration• The Public Access print servers are immediately available for everyone on the network• The Axis Gateway Configuration Utility is an installation and configuration tool for NDPSprinters in the NetWare environment.The Axis Gateway will appear in NetWare 5.1 and later releases. You can download the AxisGateway Configuration Utility for use with earlier versions of NetWare from www.axis.com.• To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to printusing IPX/SPX, Axis print server firmware 5.51 or later is needed.
