The Test Button208 AXIS 5570e User’s ManualSection 23 The Test ButtonThe test button is located on the front right hand side of the AXIS 5570eand is used for:• Printing a test page to check the connection to the printer.• Printing a parameter list to see the print server’s current settings.• Performing a Factory Default of the print server.If you want to change any of the parameters, use one of the methodsdescribed in “Management and Configuration” on page 127.Printing a Test Page Press the test button once to print a test page. The Test Page containsbasic information about the AXIS 5570e. It is recommended that youprint a test page every time you have connected the print server to aprinter.Printing the ServerReport & ParameterListPress the test button twice to print a server report and parameter listshowing the current AXIS 5570e settings.Server Report The Server Report includes the settings of the Axis Network Print Server,information about your connected printers as well as the current networksettings.Parameter List This list provides comprehensive details of all the parameters and theircurrent status. Refer to The Parameter List, on page 216.If you want to change any of the parameters, use one of the methods thatare described in Management and Configuration, on page 127.Performing a FactoryDefault1. Remove the external power supply to switch off the print server.2. Press and hold down the test button while you reconnect the external powersupply.3. Continue to hold down the test button until the network indicator remainsconstantly lit. This should take about 20 seconds.4. Restart the print server by disconnecting and reconnecting the externalpower supply.Important!A Factory Default will reset all AXIS 5570e parameters and settings to their default valuesexcept:• Installed certificate• Private key
