Management and ConfigurationAXIS 5570e User’s Manual 1355. Save the config file to the Axis Network Print Server by typing:put config CONFIGNotes:The example on the next page describes how to upload and download theconfig file using FTP from a DOS window.Example:Viewingthe Account FileThe account file contains data concerning the ten last print jobs. Itspecifies an internal job number, the user that initiated the job, theprotocol and logical printer that was used, current status (Completed, Off-line, or Printing), number of bytes printed, elapsed time and off- linetime.Follow the instructions below to view the account file using FTP:1. Log in to the Axis Network Print Server by typing:ftp or ftp in a DOS windows (Windowsand OS/2) or in a UNIX shell.2. Enter the user id and the password. (The default entries are root and pass.)• It is important that the destination file is specified in capital letters. Otherwise the editsare temporary and will be lost once the Axis Network Print Server has been powered off.• To edit the config file from a Macintosh you will need FTP support such as MacTCP, Fetchor Anarchie. The procedure for editing the file is the same as described above.> ftp npserverconnected to npserver.220 AXIS 5570e FTP Network Print Server V7.10 Oct 04 2006ready.Name (npserver:root): root331 User name ok, need passwordPassword: pass (not visible)230 User logged inftp> get config200 PORT command successful.150 Opening data connection for CONFIG (192,168,0,10,4,5),(mode ascii).226 Transfer complete.65066 bytes received in 0.52 seconds (1.2e+02 Kbytes/s)ftp> put config CONFIG200 PORT command successful.150 Opening data connection for CONFIG (192,168,0,10,4,5),(mode ascii).226 Transfer complete.65066 bytes sent in 0.86 seconds (74 Kbytes/s)ftp> bye221 Goodbye.>
