Upgrading the Firmware170 AXIS 5570e User’s Manual7. If you do not have a default password, just click Next >. If some of yourservers use a different User ID or Password than the default entries, they willbe displayed in the Remaining servers list. Enter the User ID and Passwordfor each individual server. Click Next >.8. Name the upgrade job. This is optional, so you can leave the field blank ifyou want. Click the Start button to start the upgrading job.9. You can view the progress of the job in the Event Log.Refer to “Using AXIS ThinWizard for Print Server Management” on page132 for more information about AXIS ThinWizard.Upgrading using FTP To upgrade over the network using FTP you will need a file with the newprint server firmware. The name of this file is in the formproduct_version.bin.Ensure that FTP Enabled is set to yes. To check this parameter, browse tothe print server and select Admin | Network Settings | Detailed View |TCP/IP Network.Caution!The objective of this example is to upgrade a print server to firmwareversion 7.10.The description below from a typical Windows session uses the followingexamples:• Print server model: AXIS 5570e• IP address of print server: 10.13.4.105• New firmware version name: 5570e_7_10.bin• Location of firmware and upgrade procedure: c:\AxisBe careful not to interrupt the file transfer. If the transfer is interrupted, the print server mayhave to be re-initialized by your dealer.
