Configuration Possibilities160 AXIS 5570e User’s ManualNetwork SpeedWith the Network Speed parameter you can manually specify the speed atwhich you will send and receive network packages. You can change theNetwork Speed setting to correspond to the type of network you are using(10 or 100 Mbit).To change the Network Speed in an Ethernet network, log in to the printserver’s internal Web pages and click Admin | General Settings =>Change. From here, you have the option of setting the network speed to:The default Network Speed value is AUTO_SENSE, which is the correctoption for the majority of users.If you choose a faulty Network Speed option for your network, you mayloose contact with the print server.To reset the Network Speed parameter to AUTO_SENSE, you will have toreboot the print server (disconnect and then re-connect the externalpower supply).Network Speed CommentAUTO_SENSE This is the default value where the print server detects which speed is op-timal for each network package you transfer.10_HALF__DX 10 Half Duplex10_FULL_DX 10 Full Duplex100_HALF_DX 100 Half Duplex100_FULL_DX 100 Full Duplex
