SNA Parameter OverviewAXIS 5570e User’s Manual 175ChangingParameters afterAuto-configurationIf you want to change some of the critical configuration parameters afterauto-configuration is completed, you should first set AUTODIAL to NO,then remove all descriptions in the AS/400, and then change theparameter(s) and set AUTODIAL to YES to initiate a new configurationprocess.Auto-configuration and MappingThe configuration created in the AS/400 and the mapping to the AxisNetwork Print Server as a result of the auto-configuration process isillustrated by the figure below.%CONFIG+ password(If you have not changed the defaultpassword (pass), the password is optional.)PRDRIVER = PCL5;%CONFIG++NODE_SAP = 4;H1_SAP = 4;AUTODIAL = NO;%CONFIG--PREMUL = 3816;SYSL = 37;BIN1 = LETTER, COR;SAVE;%CONFIG-APPC-controllerAPPC-deviceRWS-controllerPrinter device #1Printer device #2Printer device #3Logical Printer #1Logical Printer #2Logical Printer #3Configuration in theAXIS 5470eConfiguration in theAS/400Logical mappingsLU 6.2 conversation
