R5906112 /09 UDX series 1038.2 Configuring the lens, shiftWhat can be done?The image can be optically shifted by using the vertical and horizontal lens shift.If you want to reach a lens shift beyond what is possible with the optical shift, you can also perform a digitallens shift. This digital shift will occur on the DMD, rather than the lens holder. So take into account that thisadditional shift is minimal and restricted to the limits of the chip used.For the digital zoom and shift, navigate to Home → Image → Digital Zoom Shift.Optical lens shift is only possible when the used lens has been fully calibrated. To calibrate the lens,navigate to System Settings → Maintenance → Lens Calibration.Vertical and Horizontal Shift1. In the main menu, select Installation → Lens → Shift.Image 8-3: Lens menu, Lens shiftThe Lens shift menu is displayed.Image 8-4: Lens shift menu2. Use the ◄ and ► keys to shift the lens (image) in horizontal direction.Use the ▲ and ▼ keys to shift the lens (image) in vertical direction.GUI – Installation
