R5906112 /09 UDX series17810.14 Flex brightnessOverviewWith the FLEX technology the projector owners can lock the light output to different levels. The locking can bedone via 3 different ways:• Via Projector Toolset when connected via an Ethernet connection with the projector. See ProjectorToolset's user guide, chapter ““FLEX, light output control””.• Via the OSD menu of the projector itself• Via an SMS message send to a projector equipped with an optional GSM board.To lock to a specific value a 4 digit code is necessary; These codes can be created by the projector ownerusing Projector Toolset.AvailabilityThe Flex brightness function is license protected. This license is already available in UDX 4k32, U32 andW32. To activate the Flex brightness a Flex code is necessary. This Flex code can be requested for free anduploaded via Projector Toolset. For more information about uploading this Flex code, see Projector Toolset’suser guide, chapter ““FLEX, light output control””.For other models, Flex brightness is an option. You can order and buy a license file. This license file is linkedwith the projector type and projector serial number. Once you received you license file, upload this file viaProjector Toolset to your projector. Once the file is uploaded, the same file has to be used to upload the Flexcode.Flex codesOnce your Flex code is correctly uploaded, the projector creates a number of flex codes, one for each possiblemaximum light output. These codes are used for rental activities when adapting the light output of theprojector.The created flex codes are only visible in Projector Toolset by the projector owner. To make these visible hewill need his license for this typical projector.Maximum Light output setup via OSD menu1. In the main menu, select System Settings → Maintenance → Flex.Image 10-39: Maintenance menu, FlexThe Flex menu is displayed.GUI – System Settings
